Use Method Of Meatballs Machine

1. This confidential place in a stable, connect the power supply and ground, to ensure safety, the machine is equipped with power 550 watts, counterclockwise turn, in the rear of the machine Pipe.

2. The machine should be cleaned before use, this machine is a kind of auxiliary machinery. Working methods: First of all the meat in the meat grinder (to the root) in meatballs The machine stirred into the meat pulp, and then put into the molding machine processing. 

3. In the copper sleeve has a meat adjustment switch, can adjust the meatballs roundness (when the meat is too much, meatballs grow longer, small meat, the meatballs flattened, The meat pulp is too small, the machine does not work properly. 

4. Place a large tub under the meatball mouth, and then hold warm water. 

5. The machine is equipped with a large small and medium-sized mold three sets of interchangeable, the method is to the copper gears in the mold head and the plate to remove the sliding plates. 

6. Put the paste into the meat bucket, open the slide on the top of the water pipes (water to small, cleaning the blade), then the power to boot, power on Then put the first processed meatballs into the meat barrel (not molding meatballs). 

7. Meatballs finished processing to push the rod, meat barrel, copper sleeve and the copper remove cleaning dry. 

8. Use a period of time to check the machine inside the spring is available, if not elastic to replace the new.